Programming Adjustable Pedal Positions

An adjustable pedal position can be stored at any time.

Programming adjustable pedal positions can be accomplished by doing the following:

• An adjustable pedal position can be stored at any time. To store the adjustable pedal position to memory, the driver must move the pedals to the preferred position using the adjustable pedal switch. The driver must then depress the memory SET switch, activating the memory SET switch light emitting diode (LED). Within 5 seconds (before the LED goes out), the driver must select a memory position. Memory Number 1 is selected by depressing the 1 switch. Memory Number 2 is selected by depressing the 2 switch.
• If no memory switch input is received within the 5 second time limit, the operation is aborted and the memory SET switch LED is turned OFF. If one of the following inputs is received during the 5 second programming limit, the operation is aborted and the memory SET switch LED is turned OFF:
  • Adjustable pedal switch
  • Power driver seat switch
  • Power outside rearview mirrors switch
  • Memory SET switch

To program the remote keyless entry (RKE) transmitter, refer to REMOTE KEYLESS ENTRY TRANSMITTER PROGRAMMING .