LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lincoln >> 2007 >> Navigator L 4WD >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine System - General Information >> General Procedures >> Connecting Rod Bend
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Connecting Rod Bend

  1. Measure the connecting rod bend on a suitable alignment fixture. Follow the instructions of the fixture manufacturer. Verify the bend measurement is within specification.
    • Refer to ENGINE article for the procedure.
    • If out of specification, install new components as necessary. Refer to ENGINE article for the procedure.
    2. Fig 1: Measuring Connecting Rod Bend
    GF0000198Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals