LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lincoln >> 2010 >> MKT Base, AWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Accessories Control Systems >> Universal Transmitter - Remote Convenience System >> General Procedures >> Universal Transmitter Programming >> Universal Transmitter Programming (Rolling Code) - Early Build (Homelink®)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Universal Transmitter Programming (Rolling Code) - Early Build (Homelink®)

NOTE: It may be helpful to have an assistant with this procedure.
  1. At the garage door opener receiver (the motor-head unit) in the garage, locate the "learn" or "smart" button. This can usually be found near where the hanging antenna wire is attached to the motor-head unit; or it may be under the light bulb cover of the motor-head unit.
  2. Turn the ignition ON.
  3. Firmly press and release the "learn" or "smart" button. (The name and color of the button may vary by manufacturer).
    NOTE: Step 4 must be initiated within 30 seconds of pressing and releasing the "learn" or "smart" button.
  4. Return to the vehicle and firmly press, hold for 2 seconds and release the programmed universal transmitter button. Repeat the press/hold/release sequence a second time and depending on the brand of the garage door opener (or other rolling code-equipped device), repeat this sequence a third time to complete the programming process.
scientia non olet · About LEMON Manuals