Section 613 (Climate Control)
WARNING: This page is about a different car, the 2006 Mercury Milan, 2006 Lincoln Zephyr, and 2006 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
- Specifications
- Description And Operation
- Air Conditioning
- Air Distribution and Filtering
- Control Components
- Electronic Manual Temperature Control
- Control System Inputs
- Climate Control Assembly (EMTC Module)
- Blower Motor Switch
- Control System Outputs
- Blower Motor Resistor
- Temperature Blend Door Actuator
- Mode Door Actuator
- Air Inlet Mode Door Actuator
- Electronic Automatic Temperature Control
- EATC Module
- Blower Motor Speed Control
- Temperature Blend Door Actuator(s)
- Heating and Ventilation
- Removal And Installation
- Air Conditioning (A/C) Compressor - 2.3L
- Air Conditioning (A/C) Compressor - 3.0L
- Air Conditioning (A/C) Evaporator Discharge Air Temperature Sensor
- Ambient Air Temperature Sensor
- Blower Motor
- Blower Motor Resistor
- Blower Motor Speed Control
- Blower Motor Switch
- Climate Control Assembly
- Clutch and Clutch Field Coil
- Compressor Manifold and Tube Assembly - 2.3L
- Compressor Manifold and Tube Assembly - 3.0L
- Condenser Core
- Evaporator Core
- Removal and Installation
- Heater Core
- Heater Core And Evaporator Core Housing
- In-Vehicle Temperature Sensor
- Mode Door Actuator - Air Inlet Door
- Mode Door Actuator - Defrost/Panel/Floor Door
- Receiver Drier
- Register - Center, Fusion/Milan
- Register - Driver and Passenger Side, Fusion/Milan
- Register - Zephyr
- Temperature Blend Door Actuator - LH
- Temperature Blend Door Actuator - RH, Dual-Zone EATC
- Thermostatic Expansion Valve
- Thermostatic Expansion Valve Manifold and Tube Assembly