LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lincoln >> 2012 >> MKT Base, AWD >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Electronic Engine Controls >> Removal And Installation >> Intake Air Temperature (IAT) Sensor >> Removal and Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal and Installation

  1. Disconnect the Intake Air Temperature (IAT) sensor electrical connector.
  2. Remove the IAT sensor.
    • Lift the tab and turn the IAT sensor counterclockwise to remove.
      Fig 1: Locating Intake Air Temperature (IAT) Sensor Tab
      G06253949Courtesy of FORD MOTOR CO.
  3. To install, reverse the removal procedure.
    • Make sure the IAT sensor tab is fully seated during installation.
scientia non olet · About LEMON Manuals