LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lincoln >> 2012 >> MKZ Base, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1434 (Engine Controls - Acceleration Control System) >> Removal & Installation >> Accelerator Pedal and Bracket >> Removal
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Accelerator Pedal and Bracket: Removal

WARNING: This page is about a different car, the 2010 Lincoln Town Car. However, it is still accessible from the selected car via links, so may be relevant.
    NOTE: To prevent setting DTCs, make sure the ignition switch is in the OFF position prior to disconnecting the accelerator pedal electrical connectors.
  1. Disconnect the accelerator pedal sensor electrical connector.
  2. Disconnect the accelerator pedal motor electrical connector.
  3. Disconnect the accelerator pedal motor drive cable connector.
  4. Remove the 3 nuts and the accelerator pedal and bracket assembly.
scientia non olet · About LEMON Manuals