LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lincoln >> 2013 >> MKS EcoBoost >> Repair and Diagnosis >> External Pages >> Different car >> Section 568 (Module Communications Network (Electric Vehicle)) >> Diagnosis And Testing >> Communications Network >> Pinpoint Tests >> Pinpoint Test O : The Front Controls Interface Module (FCIM) Does Not Respond To The Scan Tool >> Notes
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Pinpoint Test O : The Front Controls Interface Module (FCIM) Does Not Respond To The Scan Tool: Notes

WARNING: This page is about a different car, the 2015 Ford Focus. However, it is still accessible from the selected car via links, so may be relevant.

Refer to POWER DISTRIBUTION for schematic and connector information.

Refer to AUDIO SYSTEM/NAVIGATION for schematic and connector information.

Normal Operation and Fault Conditions 

The FCIM communicates with the scan tool through the Infotainment Controller Area Network (I-CAN).

Possible Sources 

Visual Inspection and Diagnostic Pre-checks 

Verify BCM fuse 79 (15A) is OK.