Pinpoint Tests: Notes

NOTE: Most faults are due to connector and/or wiring concerns. Carry out a thorough INSPECTION AND VERIFICATION before proceeding with the pinpoint test.

NOTE: Use the correct probe adapter(s) from the Flex Probe Kit when taking measurements. Failure to use the correct probe adapter(s) may damage the connector.

Refer to INSPECTION AND VERIFICATION , DRIVER DOOR MODULE (DDM) DTC CHART , DRIVER SEAT MODULE (DSM) DTC CHART , DUAL CLIMATE CONTROLLED SEAT MODULE (DCSM) DTC CHART and the SYMPTOM CHART for direction to the appropriate pinpoint test.