Pinpoint Test Bf : DTC B19A3: Notes

Pinpoint Test BF: DTC B19A3 

Refer to Wiring Diagrams Climate Controlled Seats for schematic and connector information.

Normal Operation 

The Passenger Climate Controlled Seat Module - 2 (PCSM-2) supplies voltage and ground to the LH rear seat cushion Thermo-Electric Device (TED). The Passenger Climate Controlled Seat Module - 2 (PCSM-2) also sends a speed control voltage signal to the TED to control blower speed.

• DTC B19A3 (Driver Seat Cushion Blower Speed Short to Battery) - If the LH rear seat cushion blower speed circuit is shorted to voltage, the PCSM-2 will shut down the LH rear seat system and set this DTC.

This pinpoint test is intended to diagnose the following: 

• Wiring, terminals or connectors
• TED and blower assembly
• PCSM-2