Removal And Installation: Generator: Installation

Radial arm installation only 

1. 1.
   
   

   1. 1.
      
      Tighten to 9 Nm (80 lb-in).

   1. 2.
      
      Tighten to 17 Nm (150 lb-in).

Courtesy of FORD MOTOR COMPANY

All vehicles 

1. 2.
   
   

Courtesy of FORD MOTOR COMPANY

1. 3.
   
   
   • Tighten to 8 Nm (71 lb-in).

Courtesy of FORD MOTOR COMPANY

1. 4.
   
   
   • Tighten to 47 Nm (35 lb-ft).

Courtesy of FORD MOTOR COMPANY

1. 5.
   
   
   • Tighten to 47 Nm (35 lb-ft).

Courtesy of FORD MOTOR COMPANY

1. 6.
   
   
   • Tighten to 17 Nm (150 lb-in).

Courtesy of FORD MOTOR COMPANY

Vehicles equipped with a 3.5L GTDI engine 

1. 7.
   
   Install the A/C compressor. For additional information, refer to Climate Control .

Vehicles equipped with a 3.7L Ti-VCT engine 

1. 8.
   
   

Courtesy of FORD MOTOR COMPANY

1. 9.
   
   Install the cooling fan assembly. For additional information, refer to Engine Cooling .

All vehicles 

1. 10.
   
   Connect the battery cable. For additional information, refer to Battery, Mounting and Cables .