October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Selector Lever: Installation
- 1.
- Tighten to 10 Nm (89 lb-in).
 Courtesy of FORD MOTOR COMPANY
|
- 2.
 Courtesy of FORD MOTOR COMPANY
|
- 3.
NOTE:
When installing the selector lever cable, make sure that the selector lever cable locking tabs are locked in place. Press the selector lever cable into the selector lever housing and listen for the selector lever cable retainer to click in place. Pull back on the selector lever cable to make sure that the selector lever is locked into the selector lever housing.
 Courtesy of FORD MOTOR COMPANY
|
- 4.
 Courtesy of FORD MOTOR COMPANY
|
- 5.
Install the selector lever bezel. Refer to Selector Lever Bezel .
- 6.
Adjust the selector lever cable when a new selector lever is installed. Refer to Selector Lever Cable Adjustment - 6F35 or Selector Lever Cable Adjustment - 6F50/6F55 .