April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal And Installation

WARNING: This page is about a different car, the 2016 Lincoln MKT. However, it is still accessible from the selected car via links, so may be relevant.

1.

Remove the 2 steering column opening trim panel screws.

2.

Detach the in-vehicle temperature sensor from the steering column opening trim panel and remove the steering column opening trim panel.
- Disconnect the electrical connector.

3.

Disconnect the in-vehicle temperature sensor electrical connector.

4.

Rotate the in-vehicle temperature sensor clockwise to disconnect it from the aspirator hose and remove the in-vehicle temperature sensor.

5.

To install, reverse the removal procedure.