LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lincoln >> 2019 >> MKZ Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1283 (Anti-Lock Brake System (Abs) And Stability Control) >> Removal And Installation >> Anti-Lock Brake System (ABS) Module >> Removal And Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Removal And Installation

WARNING: This page is about a different car, the 2018 Lincoln MKT. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Electronic modules are sensitive to electrical charges. The Anti-lock Brake System (ABS) module can be damaged if exposed to these charges.
  1. Remove the Hydraulic Control Unit (HCU). For additional information, refer to Hydraulic Control Unit (HCU) .
  2. Remove and discard the 4 screws.

    • To install, tighten the new screws to 3 Nm (27 lb-in).

  3. Remove the ABS module.
  4. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals