LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lincoln >> 2019 >> MKZ Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 16 (Engine Control System) >> Variable Charge Motion Actuator (VCMA) >> Repair procedures >> Inspection
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair procedures: Inspection

WARNING: This page is about a different car, the 2014 Hyundai Elantra GT and 2013 Hyundai Elantra GT. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn ignition switch OFF.
  2. Disconnect the VCMA connector.
  3. Check that the VCMA is not stuck by foreign material.
  4. Measure resistance between motor (+) and (-) control terminals of the motor.
  5. Check that the resistance is within the specification.

    Specification:  Refer to "SPECIFICATION "

  6. Measure resistance between voltage supply terminal and ground terminal of the position sensor.
  7. Check that the resistance is within the specification.

    Specification:  Refer to "SPECIFICATION "