DTC C200B: Steering Shaft Torque Sensor 1: Description

WARNING: This page does not describe the selected car, but rather 11 other vehicles, including the 2019 Ford Expedition, 2018 Lincoln MKZ, 2018 Ford Transit-350 HD, 2018 Ford Transit-350, and 2018 Ford Transit-250. However, it is still accessible from the selected car via links, so may be relevant.

The PSCM continually monitors the steering shaft torque sensor when the ignition is ON and the voltage supply to the PSCM is between 11 and 16 volts.

DTC C200B:29 (Steering Shaft Torque Sensor 1: Signal Invalid) - If the PSCM detects invalid data from the steering shaft torque sensor, DTC C200B:29 is set.