Pinpoint Test C : P06A0: Notes
WARNING: This page is about a different car, the 2019 Lincoln MKC. However, it is still accessible from the selected car via links, so may be relevant.
P06A0
Refer to Electronic Engine Controls - 2.3L GTDI for schematic and connector information.
Normal Operation and Fault Conditions
The externally controlled variable displacement compressor is electronically controlled by the PCM. For additional information, refer to externally controlled variable displacement compressor. REFER to: Climate Control System - System Operation and Component Description .
DTC Fault Trigger Conditions
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| P06A0 | Variable A/C Compressor Control Circuit | This DTC sets when the PCM senses greater than expected voltage on the sensor feedback circuit, indicating a short to voltage or an open circuit or an open sensor. |
Possible Sources
- Fuses
- Wiring, terminals or connectors
- A/C compressor
- PCM
Visual Inspection and Diagnostic Pre-checks
- Inspect for loose or corroded PCM and A/C compressor connections.
- Make sure BJB fuse 34 (15A) is OK.