DTC C200B: Steering Shaft Torque Sensor 1: Description

WARNING: This page is about a different car, the 2020 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.

The PSCM continually monitors the steering shaft torque sensor when the ignition is ON and the voltage supply to the PSCM is between 11 and 16 volts.

DTC C200B:29 (Steering Shaft Torque Sensor 1: Signal Invalid) - If the PSCM detects invalid data from the steering shaft torque sensor, DTC C200B:29 is set.