LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> MG >> 1968 >> MGC >> Repair and Diagnosis >> Steering >> Steering Column >> Steering Columns >> Removal & Installation >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal & Installation: Installation

  1. Install steering column in vehicle, inserting inner column into universal joint. Install spacing washers in original position and tighten bolts finger tight.
    NOTE: If spacing washers were lost or not marked for installation, steering column must be aligned. See STEERING COLUMN ALIGNMENT .
  2. Install steering column toe-plate retaining bolts at floor board. Now tighten upper column bracket bolts and universal joint clamp bolt to specification. Install air cleaner and connect battery cable.
scientia non olet · About LEMON Manuals