LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 1982 >> B2000 Base >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Spark Delay Timing Control System >> Testing >> Vacuum Delay Valve (B2000 Only)
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Vacuum Delay Valve (B2000 Only)

  1. Remove plug from intake manifold. Disconnect spark delay valve-to-distributor vacuum hose at distributor and connect directly to intake manifold vacuum.
  2. On California models, disconnect water thermo valve-to-spark delay valve vacuum hose at spark delay valve and connect a vacuum gauge. On Federal models, disconnect spark delay valve-to-carburetor vacuum hose and connect vacuum gauge.
  3. Start engine and idle. Note idle vacuum level. Pull intake manifold vacuum source off and record time it takes vacuum to decrease 11.8 in. Hg from idle vacuum reading. If time exceeds 4-6 seconds, replace spark delay valve.
scientia non olet · About LEMON Manuals