September 30: LEMON manuals is back up on a temporary server! Slowness is possible
RX7 & 626: Notes
- Caster and camber angles are adjusted together by changing position of MacPherson strut support. To adjust, remove 4 nuts attaching MacPherson strut support to fender apron.
- Raise front of vehicle and support with jack stands. Remove wheel on side to be adjusted. Press MacPherson strut downward and change position of support according to table and Fig 1 .
MacPHERSON STRUT SUPPORT TABLE
| Strut Position |
Caster |
Camber |
| A 0° |
0° |
0° |
| B 90° |
1/2° |
0° |
| C 180° |
1/2° |
1/2° |
| D 270° |
0° |
1/2° |
Courtesy of MAZDA MOTORS CORP.
- Tighten MacPherson strut support mounting nuts. Install wheel, lower vehicle and recheck caster and camber.