Removal & Installation
WARNING: This page is about the GLC Base, which is a different variant/trim than selected.
4 SPEED TRANS
| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|---|---|---|---|
| 2.8 | C | |||
| Combination Procedure: CLUTCH PILOT BEARING: Remove & Replace: | ||||
| 0.7 | C | |||
| Combination Procedure: CLUTCH PRESSURE PLATE: Remove & Replace: | ||||
| 0.6 | C | |||
| Combination Procedure: CLUTCH RELEASE BEARING: Remove & Replace: | ||||
| 0.2 | C | |||
| Combination Procedure: CLUTCH RELEASE FORK: Remove & Replace: | ||||
| 0.1 | C | |||
| Combination Procedure: FLYWHEEL: Remove & Replace: | ||||
| 0.9 | C | |||
| Combination Procedure: TRANSMISSION ASSEMBLY: Replace: | ||||
| 0.4 | C | |||