October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Water THERMO Switches
- Remove switch from radiator (except Calif. M/T). Federal models have an additional thermo switch on intake manifold.
- Place the switch in water with a thermometer and gradually heat water. Check temperature at which continuity exists between both terminals of switch.
- The switch should show continuity at 59-67°F (15-19°C) if located in radiator, 118-126° (48-52°C) if located in intake manifold. Replace switch if it does not agree with standard value.