LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 1986 >> B2000 LX, 2D Pickup >> Repair and Diagnosis >> Engine Performance >> System >> Air Injection System >> Component Testing >> Reed Valve
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Reed Valve

  1. Bring engine to normal operating temperature and stop engine. Remove air cleaner cover and element. Start and run engine at idle.
  2. Place a piece of paper over inlet port of reed valve. Verify that air is being drawn into reed valve. Increase engine speed to 2500 RPM. Holding a piece of paper over valve inlet, check for exhaust leakage through valve port. Replace reed valve if leakage is present.
scientia non olet · About LEMON Manuals