LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 1987 >> B2200 Base, 2D Pickup Extra Cab >> Repair and Diagnosis (Single Page) >> Engine Performance >> System >> 2.2L Feedback Carburetor System >> Component Testing >> System Components >> Vacuum Sensor
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Vacuum Sensor

  1. Remove vacuum hose and attach a vacuum pump to sensor. Turn ignition on. Check voltage between each terminal and ground while applying and releasing 30 in. Hg to sensor. See Figure .
    VACUUM SENSOR TERMINAL VOLTAGE

    Terminal Voltage
    "A" Less Than 1.5
    "B" 4.5-5.5
    "C" 12
    "D" 1.4-4.9
  2. If voltages at terminal "A", "B", or "C" is not within specifications, check wiring harness to sensor. If voltages at terminal "A", "B", or "C" is within specifications, but terminal "D" is not within specifications, replace vacuum sensor.
scientia non olet · About LEMON Manuals