LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 1987 >> RX-7 GXL, Standard >> Repair and Diagnosis >> Engine Performance >> Ignition System >> Overhaul >> Crank Angle Sensor >> Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Crank Angle Sensor: Removal

Set eccentric shaft pulley to leading mark (Yellow mark) by turning pulley. Disconnect crank angle sensor connector. Remove lock nut and sensor.

scientia non olet · About LEMON Manuals