LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 1988 >> 929 Standard >> Repair and Diagnosis (Single Page) >> Engine Performance >> Testing & Diagnosis >> EGI Control System >> Component Testing >> System Components >> Inhibitor Switch (A/T)
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Inhibitor Switch (A/T)

  1. Disconnect 3-pin connector near battery. Measure resistance between wires.
  2. With selector lever in "P" or "N", resistance should be zero ohms. With selector lever in any other position, resistance should be infinite.
scientia non olet · About LEMON Manuals