October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Idle Switch
- Disconnect throttle sensor connector. Connect an ohmmeter between terminals C and D. With a .02" (.5 mm) feeler gauge between throttle stop and throttle lever, resistance should be zero ohms. See Fig 1
.
- With a .028" (.7 mm) feeler gauge between throttle stop and throttle lever, resistance should be infinite. If not within specifications, adjust throttle sensor.
Courtesy of MAZDA MOTORS CORP.