October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Throttle Sensor
- Disconnect throttle sensor connector. Connect an ohmmeter between throttle sensor terminals A and D. Resistance should be 3500 6500 ohms. See Figure
.
- Connect ohmmeter between throttle sensor terminals B and D. Gradually open throttle valve and note resistance. With throttle valve closed, resistance should be less than 1000 ohms. With throttle valve fully open, resistance should be 3500-6500 ohms. If not within specifications, check adjustment.