October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Boost Or Pressure Sensor
- Disconnect vacuum hose from sensor. Connect voltmeter to "D"
terminal. See Fig 1
.
Using vacuum pump, apply 3.9 in. Hg to sensor.
- Turn ignition on and note voltage reading. Voltage should be
within 2.5-3.5 volts for non-turbo or 2.0-2.5 volts for turbo models.
Replace sensor if not within specification.
Courtesy of MAZDA MOTORS CORP.