October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Variable Resistor

Remove resistor connector. Note terminal identification. See Fig 1 . Using ohmmeter, check resistance at specified terminals. See VARIABLE RESISTOR RESISTANCE table. Replace resistor if not within specification.

NOTE: Idle mixture must be adjusted if variable resistor is replaced.

VARIABLE RESISTOR RESISTANCE

Terminal	k/Ohms
A & C	.5-4.5
B & C	.5-4.5

Fig 1: Checking Variable Resistor

Courtesy of MAZDA MOTORS CORP.