September 30: LEMON manuals is back up on a temporary server! Slowness is possible
Injector Fuel Leakage
- Remove dynamic chamber, if necessary. Loosen delivery pipe attaching bolts. Remove delivery pipe. Using wire, secure injectors tightly onto delivery pipe.
CAUTION:
Ensure injectors are securely tied to delivery pipe. If not properly secured, fuel may spray from loose connections.
- Install jumper wire between 2 terminals of fuel pump test circuit connector. See BASIC TESTING
for test connector location. Turn ignition on. Check that no fuel leakage exists at injectors. After 5 minutes, only a slight amount of fuel leakage is acceptable.