October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Leading Side Coil (RX7)

Disconnect negative battery cable. Connect ohmmeter to appropriate terminals to check coil resistance. See Fig 1 . Replace coil if resistance is not .2-1.0 ohm.

Fig 1: Testing Coil Resistance (RX7)

Courtesy of MAZDA MOTORS CORP.

CAUTION: During testing procedure, ensure high tension leads remain connected to coil. Disconnecting of high tension leads may cause high voltage sparks. Ensure battery is fully charged.