October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Engine Compression: RX7
- Warm engine to normal operating temperature. Disconnect crank angle sensor connector. Hold throttle plate fully open. Remove both trailing spark plugs (the 2 top spark plugs). Connect Compression Tester (49-F018-9A0) to upper spark plug hole of front rotor housing.
- Crank engine for 5-10 seconds at specified cranking speed. Note the compression of the 3 combustion chambers. Repeat procedure at the rear rotor housing.