LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 1991 >> MX-6 LX, Automatic >> Repair and Diagnosis >> Engine Performance >> Engine Controls - Adjustments >> Throttle Position Sensor (TPS) >> RX7 >> Inspection
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Throttle Position Sensor (TPS): RX7: Inspection

  1. Warm engine to normal operating temperature. Turn off engine. Connect Engine Signal Monitor (499200162) between ECU and ECU wire harness using Adapter Harness (49G018903).
  2. Check voltages at ECU terminals 2F and 2G. See Fig 1 . See RX7 TPS VOLTAGE TABLE  . If voltages are not within specification, remove engine signal monitor and adapter harness. Adjust TPS. See ADJUSTMENT.
Fig 1: RX7 Connecting Engine Signal Monitor
G90F18353Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals