LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 1993 >> 626 ES, Automatic >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake System >> Diagnosis & Testing >> Component Testing >> Stoplight Switch: Harness Test
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Stoplight Switch: Harness Test

Turn ignition off. Disconnect ABS control unit 12-pin connector. Turn ignition on. Check voltage between ABS control unit (vehicle harness side) connector terminal 1M (White/Green wire) and ground. See Figure . If voltage is not as specified, check wiring harness between stoplight switch and ABS control unit.

scientia non olet · About LEMON Manuals