LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 1993 >> 929 >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul >> Ignition System >> Crank Angle Sensor >> Removal & Installation (929)
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Removal & Installation (929)

Crank angle sensor is located on front of engine, near crank pulley. To remove, disconnect sensor connector. Remove mounting bolt. Remove sensor. To install, reverse removal procedure. Adjust ignition timing. See ADJUSTMENTS article. Tighten bolt to specification. See TORQUE SPECIFICATIONS  table.

scientia non olet · About LEMON Manuals