LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 1993 >> RX7 2RTR-1308cc 80 >> Repair and Diagnosis >> Starting and Charging >> Starting System >> Testing and Inspection >> System Testing >> Hold-In Test
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Hold-In Test

1. Complete Pull-In Test as described in this section, then disconnect wire from starter terminal M while pinion is ejected.
2. Ensure pinion does not return when wire is disconnected.
scientia non olet · About LEMON Manuals