LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 1994 >> B3000 Base, 2D Pickup, Automatic >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul >> Fuel System >> Fuel Line Connectors >> Disconnect (Push-Connect Fitting)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Disconnect (Push-Connect Fitting)

  1. Release fuel system pressure. See FUEL SYSTEM PRESSURE RELEASE  . Remove locking (safety) clip (if equipped).
  2. Position Push-Connect Fitting Releaser (49-UN01-053 for 5/16" line; 49-UN01-054 for 3/8" line) over fuel line. See Figure . Slide releaser into fitting. Pull fuel lines apart.
scientia non olet · About LEMON Manuals