October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Throttle Position (TP) Sensor: Adjustment
- Insert a feeler gauge of specified thickness between throttle lever and throttle stop screw. See TP SENSOR ADJUSTMENT (3.0L) table. Check continuity between TP sensor connector terminals "C" and "D". See Fig 1
.
- If continuity is not as specified, loosen TP sensor mounting screws. Rotate TP sensor until continuity is as specified. Tighten mounting screws. Connect TP sensor connector.
TP SENSOR RESISTANCE
| Application |
Ohms |
| 3.0L |
| Between Terminals "A" & "D" |
3000-6000 |
| Between Terminals "B" & "D" |
| Closed Throttle |
About 1000 Or Less |
| Wide Open Throttle |
3000-6000 |
TP SENSOR ADJUSTMENT
| Condition |
Continuity Between Terminals "C" & "D" |
| 3.0L |
| .020" (.5 mm) |
Yes |
| .028" (.7 mm) |
No |
Courtesy of MAZDA MOTORS CORP.