With Automatic Transaxle

REMOVAL

NOTE: Obtain audio anti-theft access code before disconnecting battery cables.

- Disconnect negative battery cable.
- Disconnect sensor connector.
- Remove the vehicle speedometer sensor from the transaxle case.


INSTALLATION
- Lubricate a new O-ring with automatic trans. fluid.
- Install the O-ring onto the vehicle speedometer sensor.
- Install the sensor into the transaxle case and torque sensor retaining bolt to specification.

Torque: 4.9 - 6.9 Nm (43 - 61 in.lb.)

- Connect sensor connector
- Connect negative battery cable.