LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 1994 >> MX-6 Base, Standard >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake System >> Diagnosis & Testing >> Component Testing >> Stoplight Switch (Harness Test)
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Stoplight Switch (Harness Test)

Turn ignition off. Disconnect ABS control unit 12-pin connector. Turn ignition on. Check voltage between ABS control unit (vehicle harness side) connector terminal 1M (White/Green wire) and ground. See Figure . If voltage is not as specified, check wiring harness between stoplight switch and ABS control unit.

scientia non olet · About LEMON Manuals