LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 1994 >> Protege Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 38 (Engine Controls - Adjustments) >> Throttle Position (TP) Sensor >> Inspection
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Throttle Position (TP) Sensor: Inspection

WARNING: This page is about a different car, the 1994 Mazda 929. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect TP sensor connector. Using an ohmmeter, measure resistance between specified terminals of TP sensor connector. See TP SENSOR RESISTANCE  table. See Figure . If resistance is not as specified, adjust TP sensor. See ADJUSTMENT procedure.

scientia non olet · About LEMON Manuals