LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 1994 >> RX-7 Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - System/Component Tests >> Computerized Engine Controls >> Powertrain Control Module
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Powertrain Control Module

  1. Locate Electronic Control Unit (ECU) or Powertrain Control Module (PCME). See ECU/PCME LOCATION table. Connect Engine Signal Monitor (49-9200-162) to ECU/PCME. See Fig 1 . Check voltage at each terminal of ECU/PCME. If input and output component voltage readings are not as specified, check faulty component. Proceed to PIN VOLTAGE CHARTS article in the ENGINE PERFORMANCE section, TESTS W/CODES article, and testing for appropriate component in this article.
  2. If input and output component voltages are as specified and ECU/PCME voltage is incorrect, replace ECU/PCME.
CAUTION: DO NOT apply voltage to terminals "A" and "B" of engine signal monitor. See Fig 1 .
ECU/PCME LOCATION

Application Location
RX7 Behind Passenger Front Side Trim Panel
Fig 1: Testing Engine Control Unit (ECU)
G93D81128Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals