LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 1995 >> B2300 2WD L4-2.3L VIN A >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Camshaft Position Sensor >> Service and Repair
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Camshaft Position Sensor: Service and Repair

REMOVAL / INSTALLATION
1. Disconnect the camshaft position sensor connector.
2. Remove the camshaft position sensor.
3. Install in the reverse order of removal.

Tightening torque: 5 - 7 Nm (44 - 62 in.lb.)


scientia non olet · About LEMON Manuals