LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 1995 >> MX-6 Base, Standard >> Repair and Diagnosis >> Electrical >> Gauges >> Instrument Panel >> System Testing >> Temperature Gauge Sending Unit
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Temperature Gauge Sending Unit

Remove temperature gauge sending unit. Place temperature gauge sending unit in a pan of water with a thermometer. Gradually heat water. Measure resistance between temperature gauge sending unit connector terminal and sending unit body. See TEMPERATURE GAUGE SENDING UNIT RESISTANCE  . If resistance is not as specified, replace temperature gauge sending unit.

TEMPERATURE GAUGE SENDING UNIT RESISTANCE

Application Specification
MX-3, MX-6, Protege, & 626 190-260 Ohms @ 122°F (50°C)
scientia non olet · About LEMON Manuals