After Repair Procedure

WARNING: This page is about a different car, the 1995 Mazda B4000, 1995 Mazda B3000, and 1995 Mazda B2300. However, it is still accessible from the selected car via links, so may be relevant.

After repairs have been completed, connect NGS tester to DLC-2. See Figure . Select clear codes function and clear codes. Repeat QUICK TEST to ensure all OBD-II systems work properly and diagnostic trouble codes are no longer present. If diagnostic trouble code P1000 is present, go to P1000 trouble code chart.

CAUTION: DO NOT disconnect vehicle battery to clear codes. This will erase operating information from Keep-Alive Memory (KAM). To clear KAM, disconnect negative battery terminal for at least 5 minutes.

CAUTION: When battery is disconnected, vehicle computer may lose memory data. Driveability problems may exist until computer systems have completed a relearn cycle. See appropriate COMPUTER RELEARN PROCEDURES article in GENERAL INFORMATION before disconnecting battery.