October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Crankshaft Position Sensor: Adjustments

Adjustment
1. Loosen bolt (A).

2. Adjust the air gap between the crankshaft pulley projection and the crankshaft position sensor by using a feeler gauge.

Specification: 0.5-1.5 mm (0.020-0.059 in.)

3. If not adjusted, replace the bracket and readjusted the air gap.
4. If not adjusted, replace the crankshaft pulley or the crankshaft position sensor.