LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 1997 >> B2300 Base, Automatic >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul >> Ignition System >> Crankshaft Position Sensor >> Removal & Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal & Installation

Disconnect negative battery cable. Remove alternator. Drain cooling system and remove water outlet tube. Disconnect crankshaft position sensor wiring harness connector. Remove sensor mounting bolt and pry sensor from front of engine. To install, reverse removal procedure. See TORQUE SPECIFICATIONS  . Ensure coolant level is correct.

scientia non olet · About LEMON Manuals