LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 1997 >> MX-6 Base, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 7 (Engine Controls - Basic Testing - 2.5L) >> Fuel System >> Fuel Pressure >> Fuel Pump Relay
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Fuel Pump Relay

WARNING: This page is about a different variant/trim than selected.
  1. Locate fuel pump relay. See FUEL PUMP RELAY LOCATIONS  table under FUEL PRESSURE RELEASE. Using jumper wires, connect battery voltage to fuel pump relay terminal "A" (positive) and terminal "B" (negative). See Fig 1 .
  2. With battery voltage connected, continuity should exist. With battery voltage disconnected, continuity should not exist. If continuity is not as specified, replace fuel pump relay.
Fig 1: Testing Fuel Pump Relay
G95H31424Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals