Air Flow Meter/Sensor: Service and Repair

WARNING: Fuel line spills and leaks are dangerous. Fuel can ignite and cause serious injuries or death and damage. Fuel can also irritate skin and eyes. To prevent this, always complete the "Fuel Pressure Release Procedure".

REMOVAL/INSPECTION/INSTALLATION
1. Disconnect the negative battery cable.
2. Drain the coolant from radiator.

Intake:

3. Remove in the order shown in the figure.
4. Visually check each part for damage. Replace as necessary.
5. Install in the reverse order of removal.

Fuel Hose
Before disconnecting the fuel hoses, perform "Fuel Pressure Release Procedure".